'Oversampling'' must be set to 1 when using multiple clocks. To fix this issue either change ''Oversampling'' to 1, or c

Post Reply
mamorani
Posts: 8800
Joined: Thu Feb 25, 2021 6:50 pm
Contact:
Contact mamorani

'Oversampling'' must be set to 1 when using multiple clocks. To fix this issue either change ''Oversampling'' to 1, or c

Post by mamorani »

'Oversampling'' must be set to 1 when using multiple clocks. To fix this issue either change ''Oversampling'' to 1, or change ''ClockInputs'' to ''Single''
CLI
Top
Post Reply

Return to “Signal Processing”

Who is online

Users browsing this forum: No registered users and 14 guests