The "c2d" command requires a fourth input argument (critical frequency) when using the "prewarp" method.

[esmatparast]

The "c2d" command requires a fourth input argument (critical frequency) when using the "prewarp" method.

In the "c2d" command, the prewarp frequency (critical frequency) must be smaller than the Nyquist frequency

The "c2d" command cannot be used with two output arguments when using the conversion method

The "c2d" command failed because the "foh" discretization is non causal. Try a different method or sampling time.

The "frd" command computes the nominal frequency response data. Use "ufrd" to compute an uncertain FRD model.


transformation