In the "getcov(SYS, FORMAT)" command, FORMAT must be ''value'' or ''factors''.

Post Reply
fyousefi
Posts: 3284
Joined: Thu Feb 25, 2021 4:49 pm
Contact:
Contact fyousefi

In the "getcov(SYS, FORMAT)" command, FORMAT must be ''value'' or ''factors''.

Post by fyousefi »

In the "getcov(SYS, FORMAT)" command, FORMAT must be ''value'' or ''factors''.
Top
Post Reply

Return to “System Identification Toolbox”

Who is online

Users browsing this forum: No registered users and 120 guests