In the "idinput(N,TYPE,...)" command, TYPE must be one of ''rgs'', ''rbs'', ''prbs'' or ''sine''.

Post Reply
fyousefi
Posts: 3284
Joined: Thu Feb 25, 2021 4:49 pm
Contact:
Contact fyousefi

In the "idinput(N,TYPE,...)" command, TYPE must be one of ''rgs'', ''rbs'', ''prbs'' or ''sine''.

Post by fyousefi »

In the "idinput(N,TYPE,...)" command, TYPE must be one of ''rgs'', ''rbs'', ''prbs'' or ''sine''.
Top
Post Reply

Return to “System Identification Toolbox”

Who is online

Users browsing this forum: No registered users and 12 guests