Clock-rate pipelining was applied on signals connected to the DUT's output ports. The DUT output port values are therefo

Post Reply
mamorani
Posts: 8800
Joined: Thu Feb 25, 2021 6:50 pm
Contact:

Clock-rate pipelining was applied on signals connected to the DUT's output ports. The DUT output port values are therefo

Post by mamorani »

Clock-rate pipelining was applied on signals connected to the DUT's output ports. The DUT output port values are therefore updated at the clock-rate. The following ports are phase-offset by the stated number of clock cycles

hdlcoderdemos
Post Reply

Return to “Signal Processing”

Who is online

Users browsing this forum: No registered users and 21 guests