Implements a spark-ignition (SI) controller that uses the driver torque request in conjunction with measured engine speed to calculate the open-loop air, fuel, spark, and cam-phaser actuator commands required to meet the driver torque demand. The SI Core Engine block requires the actuator commands from the SI Controller block outputs. \n \nThe block has two subsystems: \n- Controller: Determines the open-loop commands based on the commanded torque, measured engine speed, and estimated cylinder air mass. \n \n- Estimator: Determines the estimated air mass flow, torque, and exhaust gas temperature. You can specify the air mass flow and torque estimation models

autoblkSparkIgnCtrl