https://matlab1.com/forum/
In the "FINDSTATES(SYS, DATA, K, ...)" command, K must be 1 or Inf for continuous-time models.
https://matlab1.com/forum/viewtopic.php?t=8305
Page
1
of
1
In the "FINDSTATES(SYS, DATA, K, ...)" command, K must be 1 or Inf for continuous-time models.
Posted:
Mon Mar 01, 2021 8:50 pm
by
fyousefi
In the "FINDSTATES(SYS, DATA, K, ...)" command, K must be 1 or Inf for continuous-time models.