https://matlab1.com/forum/
MODEL must be a FITTYPE for a surface, i.e., NUMINDEP( MODEL ) must be 2.
https://matlab1.com/forum/viewtopic.php?t=5662
Page
1
of
1
MODEL must be a FITTYPE for a surface, i.e., NUMINDEP( MODEL ) must be 2.
Posted:
Sat Feb 27, 2021 11:10 am
by
omidrostaei
MODEL must be a FITTYPE for a surface, i.e., NUMINDEP( MODEL ) must be 2.
sfit