The distance between the feed location and the wire geometry edges is less than the minimum allowed. The minimum distanc
Posted: Tue Mar 09, 2021 12:58 pm
The distance between the feed location and the wire geometry edges is less than the minimum allowed. The minimum distance is times the wire radius
The distance between edges of the wire geometry is less than the minimum allowed. The minimum distance is times the wire radius
The distance between nodes of the wire geometry is less than the recommended minimum. The minimum distance is times the wire radius
The distance between nodes of the wire mesh is less than the recommended minimum. The minimum distance is times the wire radius
The distance between nodes of the wire mesh as dictated by the meshing wavelength is less than the minimum allowed. The minimum distance is times the wire radius. Either reduce the wire radius or the simulation frequency
The distance between nodes of the wire mesh is less than the minimum allowed. The minimum distance is times the wire radius
antennaerrors
The distance between edges of the wire geometry is less than the minimum allowed. The minimum distance is times the wire radius
The distance between nodes of the wire geometry is less than the recommended minimum. The minimum distance is times the wire radius
The distance between nodes of the wire mesh is less than the recommended minimum. The minimum distance is times the wire radius
The distance between nodes of the wire mesh as dictated by the meshing wavelength is less than the minimum allowed. The minimum distance is times the wire radius. Either reduce the wire radius or the simulation frequency
The distance between nodes of the wire mesh is less than the minimum allowed. The minimum distance is times the wire radius
antennaerrors