https://matlab1.com/forum/
If "Tw" and "Zeta" are used as parameters, "Tp1" and "Tp2" must be set to [].
https://matlab1.com/forum/viewtopic.php?t=18575
Page
1
of
1
If "Tw" and "Zeta" are used as parameters, "Tp1" and "Tp2" must be set to [].
Posted:
Mon Mar 08, 2021 1:15 pm
by
esmatparast
If "Tw" and "Zeta" are used as parameters, "Tp1" and "Tp2" must be set to [].
pmodel