https://matlab1.com/forum/
In the "init(M0,R,PAR,SP)" command, SP must be ''p'', ''s'' or ''b''.
https://matlab1.com/forum/viewtopic.php?t=16768
Page
1
of
1
In the "init(M0,R,PAR,SP)" command, SP must be ''p'', ''s'' or ''b''.
Posted:
Sat Mar 06, 2021 12:16 pm
by
fyousefi
In the "init(M0,R,PAR,SP)" command, SP must be ''p'', ''s'' or ''b''.