In the "init(M0,R,PAR,SP)" command, SP must be ''p'', ''s'' or ''b''.

Post Reply
fyousefi
Posts: 3284
Joined: Thu Feb 25, 2021 4:49 pm
Contact:
Contact fyousefi

In the "init(M0,R,PAR,SP)" command, SP must be ''p'', ''s'' or ''b''.

Post by fyousefi »

In the "init(M0,R,PAR,SP)" command, SP must be ''p'', ''s'' or ''b''.
Top
Post Reply

Return to “System Identification Toolbox”

Who is online

Users browsing this forum: No registered users and 6 guests