https://matlab1.com/forum/
The value of the "CrossTerm" option of the "polyreg" command must be ''on'' or ''off''.
https://matlab1.com/forum/viewtopic.php?t=16213
Page
1
of
1
The value of the "CrossTerm" option of the "polyreg" command must be ''on'' or ''off''.
Posted:
Fri Mar 05, 2021 9:34 pm
by
fyousefi
The value of the "CrossTerm" option of the "polyreg" command must be ''on'' or ''off''.