Solver was unable to reduce the step size without violating minimum step size of _Double} for {1,number,integer} consecutive times at time Double}. Solver will continue the simulation with the step size restricted to _Double} and using an effective relative error tolerance of {4_Double}, which is greater than the specified relative error tolerance of {5_Double}. This usually may be caused by violating algebraic constraints in the differential-algebraic system or by the high stiffness of the system. Try tightening the error tolerances, and/or the tolerances for computing consistent conditions. If the problem persists, please check the system or increase the solver <sldiag objui="configset" objparam="MaxConsecutiveMinStep">Number of consecutive min steps</sldiag> violation parameter. <actions exclusiveFixIts="yes"> <action type="suggestion"> <cmd>solverprofiler.launchSolverProfiler</cmd> <txt>Open Solver Profiler to explore such issues</txt> </action> </actions
DE