In the "IDPOLY(SYS, TYPE)" command, TYPE must be ''measured'' or ''split''.

Post Reply
fyousefi
Posts: 3284
Joined: Thu Feb 25, 2021 4:49 pm
Contact:
Contact fyousefi

In the "IDPOLY(SYS, TYPE)" command, TYPE must be ''measured'' or ''split''.

Post by fyousefi »

In the "IDPOLY(SYS, TYPE)" command, TYPE must be ''measured'' or ''split''.In the "IDSS(SYS, TYPE)" command, TYPE must be ''measured'' or ''split''.
Top
Post Reply

Return to “System Identification Toolbox”

Who is online

Users browsing this forum: No registered users and 1 guest