The distance between the feed location and the wire geometry edges is less than the minimum allowed. The minimum distanc

Post Reply
farnooshY
Posts: 1108
Joined: Thu Mar 04, 2021 2:48 pm
Contact:

The distance between the feed location and the wire geometry edges is less than the minimum allowed. The minimum distanc

Post by farnooshY »

The distance between the feed location and the wire geometry edges is less than the minimum allowed. The minimum distance is times the wire radius


The distance between edges of the wire geometry is less than the minimum allowed. The minimum distance is times the wire radius
The distance between nodes of the wire geometry is less than the recommended minimum. The minimum distance is times the wire radius
The distance between nodes of the wire mesh is less than the recommended minimum. The minimum distance is times the wire radius
The distance between nodes of the wire mesh as dictated by the meshing wavelength is less than the minimum allowed. The minimum distance is times the wire radius. Either reduce the wire radius or the simulation frequency
The distance between nodes of the wire mesh is less than the minimum allowed. The minimum distance is times the wire radius


antennaerrors
Post Reply

Return to “Antenna Toolbox”

Who is online

Users browsing this forum: No registered users and 7 guests