Multiple DMA channels are set up to use the same interrupt source, but the interrupt sources are using different GPIO pi

Post Reply
mamorani
Posts: 8800
Joined: Thu Feb 25, 2021 6:50 pm
Contact:

Multiple DMA channels are set up to use the same interrupt source, but the interrupt sources are using different GPIO pi

Post by mamorani »

Multiple DMA channels are set up to use the same interrupt source, but the interrupt sources are using different GPIO pins.\n Open the Target Hardware Resources tab on the Coder Target pane in the Configuration Parameters dialog. Next, click the Peripherals tab and choose the same external GPIO pin for all DMA channels using the same interrupt source
codegen
Post Reply

Return to “Target Hardware”

Who is online

Users browsing this forum: No registered users and 5 guests