Search found 8800 matches
- Mon Mar 15, 2021 6:22 pm
- Forum: Target Hardware
- Topic: Multiple DMA channels are set up to use the same interrupt source, but the interrupt sources are using different GPIO pi
- Replies: 0
- Views: 2836
Multiple DMA channels are set up to use the same interrupt source, but the interrupt sources are using different GPIO pi
Multiple DMA channels are set up to use the same interrupt source, but the interrupt sources are using different GPIO pins.\n Open the Target Hardware Resources tab on the Coder Target pane in the Configuration Parameters dialog. Next, click the Peripherals tab and choose the same external GPIO pin ...
- Mon Mar 15, 2021 6:21 pm
- Forum: Target Hardware
- Topic: The ''''profile'''' method cannot be used with the option ''''report'''' if the model is closed.
- Replies: 0
- Views: 2777
The ''''profile'''' method cannot be used with the option ''''report'''' if the model is closed.
The ''''profile'''' method cannot be used with the option ''''report'''' if the model is closed.
codegen
codegen
- Mon Mar 15, 2021 6:19 pm
- Forum: Target Hardware
- Topic: The ''''profile'''' method cannot be used with the option ''''report'''' if the model is closed.
- Replies: 0
- Views: 2772
The ''''profile'''' method cannot be used with the option ''''report'''' if the model is closed.
The ''''profile'''' method cannot be used with the option ''''report'''' if the model is closed.
codegen
codegen
- Mon Mar 15, 2021 6:18 pm
- Forum: Target Hardware
- Topic: ADC and/or DAC parameters cannot be accessed. Make sure that the parameter names are correct.
- Replies: 0
- Views: 2730
ADC and/or DAC parameters cannot be accessed. Make sure that the parameter names are correct.
ADC and/or DAC parameters cannot be accessed. Make sure that the parameter names are correct.
codegen
codegen
- Mon Mar 15, 2021 6:17 pm
- Forum: Target Hardware
- Topic: ADC and DAC sample rates have to be equal. Change ADC and DAC parameters so that they match
- Replies: 0
- Views: 2915
ADC and DAC sample rates have to be equal. Change ADC and DAC parameters so that they match
ADC and DAC sample rates have to be equal. Change ADC and DAC parameters so that they match
codegen
codegen
- Mon Mar 15, 2021 6:15 pm
- Forum: Target Hardware
- Topic: The timer period time must be less than seconds
- Replies: 0
- Views: 2856
The timer period time must be less than seconds
The timer period time must be less than seconds
codegen
codegen
- Mon Mar 15, 2021 6:14 pm
- Forum: Target Hardware
- Topic: Both HRPWM5 and HRPWM6 are not available for use on the ' DSP configuration
- Replies: 0
- Views: 2860
Both HRPWM5 and HRPWM6 are not available for use on the ' DSP configuration
Both HRPWM5 and HRPWM6 are not available for use on the ' DSP configuration
codegen
codegen
- Mon Mar 15, 2021 6:14 pm
- Forum: Target Hardware
- Topic: The waveform period value must be a floating-point scalar between '0.0' and seconds.
- Replies: 0
- Views: 2879
The waveform period value must be a floating-point scalar between '0.0' and seconds.
The waveform period value must be a floating-point scalar between '0.0' and seconds.
codegen
codegen
- Mon Mar 15, 2021 6:13 pm
- Forum: Target Hardware
- Topic: The entry for the mailbox number of the block is invalid
- Replies: 0
- Views: 2879
The entry for the mailbox number of the block is invalid
The entry for the mailbox number of the block is invalid
blocks
blocks
- Mon Mar 15, 2021 6:10 pm
- Forum: Target Hardware
- Topic: Host SCI Transmit or Receive blocks can not be found
- Replies: 0
- Views: 2772
Host SCI Transmit or Receive blocks can not be found
Host SCI Transmit or Receive blocks can not be found
blocks
blocks