Derivative of continuous data in chart is not finite at time The simulation will be stopped. There may be a singularity in the solution. If not, try reducing the step size (either by reducing the fixed step size or by tightening the error tolerances


translate

Invalid message connection. Message output in chart must connect to an input port that accepts messages

Invalid message connection. Message input in chart must connect to an output port that produces messages


translate

The output port inside the function call subsystem has discontiguous memory. This can happen for instance when the output port is connected to a Bus Creator block which outputs a virtual bus or to a Mux block. Such output ports cannot be used in Function call subsystems which lie inside a Stateflow ...

cannot convert parameter from data type to data type because conversion of parameters with enumerated data types is not supported.\n\nThis could be caused by leaving the initial value field of this data empty. For local data of enum type which are mapped to atomic subchart DSMs, a non-empty initial ...

Hidden 'Signal Conversion' block insertion before this input port. The hidden block parameter 'Output' is set to 'Nonvirtual bus'. Consider manually inserting such a block to debug the problem


translate

The cannot be placed inside a subsystem containing a "For Each" block. This might be because of one or more of the following reasons: 1. The has a data with scope "Data Store Memory". 2. The calls Simulink functions


translate

The Stateflow chart cannot be placed inside a subsystem containing a "For Each" block. This might be because of one or more of the following reasons: 1. The chart has a data with scope "Data Store Memory". 2. The chart accesses machine parented data. 3. The chart exports function...

String signal from output data of chart truncated at time step . Length of string exceeds upper limit of characters. Consider increasing upper limit in string type definition

translate

Cannot initialize dimensions of of to When the number of dimensions of a matrix exceeds 2, the size of the trailing dimension must be greater than 1

translate

Output data has its data type parameterized in terms of another data. This is not allowed for bus data types

Input data has its data type parameterized in terms of another data. This is not allowed for bus data types

translate